Nick Hornsey Posted January 24, 2017 Share Posted January 24, 2017 Hello, I recently updated a robot to SDK and now it reboots into the FSM every time. Is there anything I can do to get back to SDK. Thanks, Nick P.s sorry that this is very similar to an existing topic Link to comment Share on other sites More sharing options...
Pat McGrath Posted January 24, 2017 Share Posted January 24, 2017 Hi Nick, As this may be a hardware issue, I will take it offline and work with you on next steps and post the results back to the forum after we get to a root cause. I will send you a note shortly. Thanks, Pat Link to comment Share on other sites More sharing options...
Wagdi Posted March 12, 2017 Share Posted March 12, 2017 Hi guys, After managing to update our Sawyer to SDK and work with it a little bit it seems that I have the exact same issue as Nick. Each time I reboot Saywer this one reboots into the FSM... also I have the same error : CAMERA_CONFIG FAILURE. Do you have any procedure on how to proceed with this error ? Link to comment Share on other sites More sharing options...
Pat McGrath Posted March 23, 2017 Share Posted March 23, 2017 Just circling back to close the loop with the community. These two cases appear to be hardware issues, so we took them off line. Should you run into similar behavior on your Sawyer, feel free to contact us at Support@rethinkrobotics.com for additional troubleshooting Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.